RCA Universal Remote Codes List & Setup Guide

You can’t enjoy the screen if you’re using multiple remote controls. With this RCA universal remote control, you can operate all types of devices at the same time.

There is a wide variety of models out there, and depending on which one you select you must need to program with the RCA universal remote codes.

In this list, you’ll perfectly tune your remote with your device.

RCA Universal Remote Codes List

How to Program RCA Universal Remote Without Codes

By using this method, you don’t need to apply any code to the remote. The remote’s code will be scanned automatically. It’ll scan one code at a time and then check with the device until it finds the perfect one. Follow the bottom steps to program your remote.

• “Turn On” the device you want to operate.
• Start the remote and press the device button for at least 3 seconds.
• Once the LED light appears, the device is ready to program
•  Pick the remote near to TV device and press the Channel up (CH+) and Channel down (CH-) buttons. Remote will show on/off signals.
• Keep pressing up or down keys until the device turns off.
• Check the code by pressing on the “power” key. The device should turn on, If it works, switch the channels to confirm the remote is working fine.
• No to store the code press the device button, The LED light will blink two times which means the code is saved.

How to Program RCA Universal Remote With Manual Method

When you use the keycode, you will be able to easily program a universal remote control and it will identify exactly what brand and model of device you are using.

• The first step is to turn on the device
• Using the RCA universal remote control, select “TV”
• You need to hold the “Setup button” of the Universal Remote for a moment until it shows the “Light Flash” (which means it is learning mode).
•  Final step: Enter the “Keycode” that you received from the manual guide.
• After you’ve done that, simply point your remote at your TV, and then press and hold the power button.
• When the screen turns off, release the “Power Button”

You are now ready to use the universal remote control with your TV, and if your device is not working properly, repeat the same method with a different code from the same part of the reference table.

How to Program RCA Universal Remote With Code Search

If the key code is not available to complete the above method this procedure will use for the device. You can set up your universal remote to a search mode to find the right one.

It’s a code in a programming guide that will process the remote into the search mode.

• The first thing you need to do is “Turn on the device.”
• Tap and hold the “Setup” button
• Enter this “9-9-1” code
• Currently, you will have to hold down the “Power Button” on your remote and then press the Channel up button until you see the device “Turns Off”

Although this method can take a little longer, finding your key code is very important. Once you have performed the above steps, your remote should work on all the functions.